With DP-HR-U-CPU target modules, you can connect a computer with DisplayPort graphics output to a digital matrix switch of the ControlCenter-Digital or the DVICenter series. Users at the consoles of the matrix switch can access the target module and operate the connected computer. The data stream of the USB devices connected to the active user module (DVI-U-CON, DP-U-CON and DP-HR-U-CON series only) is transmitted to the computer with up to 16 Mbit/s.

 

The DH variants (DualHead) allow transmitting two video signals via one transmission cable. Following resolutions are possible:

One channel usage:
up to 2560 x 1600 @ 60Hz (2K)
or 4096 x 2160 @ 30Hz (4K)
Two channel usage:
up to 2 x 1920 x 1200 @ 60Hz
if there is less resolution and transmission on the second video channel, the first channel can transmit a higher resolution (330 MPixel/s total bandwidth)
This module makes it possible to establish multi-monitor workstations in combination with the corresponding user modules.

The cabling comes with significant advantages: transmitting two video signals on one line saves 50% of the ports at the central switch – and therefore does not only result in less complex cabling but also in a significant commercial advantage, which can be in the form of a smaller matrix system.